Saturday 31 December 2016

WadeStock

I have not touched my finished models or spent much time in my games room for about a month. I seem to lack the desire for them at the moment. However as the weather has been a bit unpredictable over the Summer break, I spend one day working outside and the next sat at my desk finishing some items off while watching repeats on TV.  I have finished off the Drum Set which may be a little too small. I guess you have to use anything in a Zombie outbreak, even a child's Drum Set. I also made some speakers out of spare blocks of Lego and some Air-con units also made out of Lego. The guy who made the Spector scenery gave me the inspiration for these.








Getting a bit tired of the repeats I ventured outside to my games room with no intention of doing anything other than looking around. I then decided that I should try and finish off the game I had been playing so I could go on to do something else. I then spent about three very enjoyable hours throwing dice around and trying to work out situations using Bolt Action that I would think that have never come up before.


This young Lady fought off the Tracker Dog twice in Hand to Hand combat, and then shot it twice causing a pin. The bikers in the Bar behind then further pinned it until it was inoperable and it was then captured.



I had to work out how these Cyber Females were to assault the Leopard Tank which was then pinned and unable to move. They were not able to damage it due to bad rolling but were very close to doing so. Meanwhile three heavy Walkers with Twin Flame throwers (out of shot) wanted to flame the Cyber Females but were worried about damaging the Tank. As it was the end of the game I just went and did it. Six shots were taken on the Females and six on the tank. Six Females were killed and the Tank was severely pinned. I guess it will need a new crew and a paint job before the next game.



In the above and below pictures I am trying out locations for the Air-con Units before I glue them down.

The next game I have set up features a Concert for the Survivors of the Invasion of the Terminators. Which I have named WADESTOCK. It has a heavy Police presence in case of over excitement or other trouble. Meanwhile the people responsible for the Rise of the Machines (am I allowed to say that?) are being punished interrogated but I forgot to take a photo of it. It involves being tied up on a rooftop with a spa pool.





Just in shot are the containers that are holding the Zombies in Cold Storage. I wonder if anyone has remembered to check the levels of Diesel in the Tanks for the Generators in all the excitment? I have printed out Akulas AR:SE rules to try out as they look like fun.

Monday 19 December 2016

Resin and other disasters

I'm not sure if I should laugh or cry but I've had a good go at producing some resin goodies, and may have learnt a few things along the way. I read a few posts on resin casting and watched some videos on Youtube.
I found the official video and cannot see that I'd done anything wrong.


However my hunch that the problems were to do with heat was backed up by a few things that I had read. One suggestion that I found suggested that post heating might help to cure the resin. So Saturday a week ago I thought that as my partner was working it would be a good time to test out post heating in the oven. I was being careful and found an oven tray which I turned upside down and then covered with tin foil. The idea being to avoid any contamination.  I preheated the oven and started to do some vacuuming which was the days chore. After about ten minutes I put the resin on the tray and intended to come back in 10 minutes to check on progress. Well it was almost like 20 minutes when I looked up from vacuuming and noticed black smoke coming from the oven. Panic time!!! first I turned off the oven then opened the oven door. I rushed to the conservatory to open the large sliding door to let some air in and then went to see what had happened to the resin. Much to my surprise nothing really except it looked a bit curled. I grabbed the whole lot and then put it on the back step and spent about half an hour trying to get rid of the smell while trying not to breath anything in. I also finished off the vacuuming. After that it was still a bit smelly so had to open the front door and put a large fan in the hallway to move some air around. Of course by the time I'd finished this the wind had changed and it had started to rain so I went outside and picked the now wet resin off the grass which was where it had blown. I then stuck it on the top of a cupboard and ignored it till Sunday. When my darling came home everything was back to normal with no smell. Presumably if my brother reads this he will drop me in it over Christmas.

Sunday I checked the resin and found that it was really hard but curled. The primer was still sticky on most of the items. I thought I'd have a go with bending the resin with hot water. First few attempts were good as I had selected the best pieces but found that the water went cold too quickly. I then thought up a way of keeping the water hotter for longer by filling a stainless mug with hot water and then sitting it in a bowl of hot water like this.


This worked really well which meant I could go on and reform all the pieces in one go. A bonus was that the primer had also stopped being sticky. I had a couple of spares that obviously were never going to work as they had resin oozing out so these were dumped. I set everything aside and went and did some gardening. Later on I came and checked the pieces out but to my disappointment found that they had all curled again and the primer was sticky again. I muttered to myself that this was not worth it and put everything in here. (quite calmly)


My thoughts on this that too much time had passed which meant that air and moisture had gotten into the resin. I thought that the time taken to do this was longer than doing it in plastic. However I still had some decent moulds and plenty of resin. I had a test run with thicker depth on the window and used the left over resin to make some ammo boxes. I also had to use the lego boxes to give greater depth and preheated everything with a lamp and then used the lamp to heat the setting resin.



Look at the colour, this looks like professional moulded resin and the details are so crisp and square. I am going to start over and remould everything over the Christmas break while the weather is warm. I still have to work out the correct amount of resin to pour as the window is way too thick and wide so I need to shim the mould. 


At this point I am very happy and am planning on doing some other casting, but first I have to finish these houses.



Saturday 10 December 2016

Steel Panther

No not the Tank Game, the Band.

I suppose like most people I had not heard of a Band called Steel Panther as they are not the type of group likely to be in the Top 40. I spend quite a bit of time on Youtube and kept getting recommendations for videos of Steel Panther. I ignored them for awhile but one day checked them out as I got curious. What I found was not really to my taste as they were on stage at one of the British festivals acting like Rock Gods. I thought WTF? they can not be serious and went and looked at something else. However some time later a Video of them doing "She's Tight" popped at on my recommendations, which is an old Cheap Trick song and one of my old favourite groups from way back. This video was well done but it was obvious by now that they were not serious. I did a bit of googling and found out that they were a Parody Glam Rock Group who started as a Van Halen tribute group with the Singer fronting LA Guns previously to that. 

The thumbnail of 'She's tight" is a bit rude to post here but worth looking at.


The Burden of being Wonderful is quite good and shows off their sense of Humour quite well.



You may wonder why I am telling you so much about this group? I have had the EM4 Musicians in my Lead Pile with only a vague idea of what I was going to use them for. This video has inspired me to paint the figures as close as them as possible but with the clothing etc being different in some cases. Lexxi for instance is tall and thin but this model has an oversize bass and he is wearing a teeshirt. The other figures were fairly easy to mimic. I had an extra Guitar player who I decided to call Angus. I later thought that I should have made him Eddie (Van Halen). I did not paint Tattoos on their arms as I was quite pleased with the skin tones already.


Lexxi, Stix,Mike, Satchel, Angus

I have started to make a set of drums for Stix.




So now I have a miniature Parody Glam Rock Band fashioned after a real Parody Glam Rock Band. If you doubt their abilities as Musicians have a listen to the excellent cover of "Don't stop believing". The rest of their songs are too full of four letter words for me to recommend here. I have downloaded quite a few of them plus some other songs from the groups that inspire them.




Of course every Band needs its fans and other hanger's on. I had bought a group of Hippies from Casting Room Miniatures which I was going to use for Vietnam but later thought it could be in bad taste, and they were dressed in a later Fashion that the Mid to Late sixties I was trying to portray.

I think they turned out real well as the sculpting is to the Foundry standard rather than Casting Rooms. I had to repaint the placard as I first copied one of Satchels Tee shirts which said, "Say Perhaps to Drugs" which I found funny for about five minutes. It looked all wrong with black writing on white so I repainted in black and then applied the new slogan which looks much better. It suits the Hippy type and should be relevant for a few years.



The next four figures are all from EM4. Three are Hangers on doubling as security while that last one is the new Leader for my Red Gang which I refer to as the Deviants. He was inspired from watching Fury Road and is meant to be an earlier version of Immortan Joe.
I think I will call him "Immoral Joe".



I have some news about my efforts with casting which I will leave for next time. 
(Some of it is actually good.)

Saturday 3 December 2016

Resin casting

I needed some ammo boxes to put on my M577 to copy a 1/35th scale model I had found on the Internet, that was based on a real vehicle of an Artillery Command vehicle. (I will dig the photos out when I complete the model) I looked for some boxes of the right size but only found smaller ones from TAG which is fine for vehicle clutter and needed something a bit larger. I then constructed four boxes of the desired type but then ran out of card etc and did not fancy making another eight.

I also had an issue with a couple of Dust Tactics buildings that looked bare without proper windows. I then made some window frames which was a bit time consuming, so thought the best solution was to cast some copies of both the windows and crates in resin. Luckily the local toyshop was having a 20% off sale at the time so was able to buy a bucket of Lego to make some boxes to cast in. I have just finished making a big pile of boxes and windows which have been washed and are now drying out. I will be able to undercoat them tomorrow. 

I had some failures which meant throwing out five boxes which were still oozing fluid plus some of the windows were a bit soft but feel like they have set properly. I have another house which needs windows but will probably just make them out of plastic as I'm not sure that casting them is worth the hassle. I am considering wether it would be worth making some cargo loads and barricades out of the resin boxes and then casting them? In the last photo I have sorted the boxes into two grades. One for vehicle cargo and the other for terrain.

Edit- well I have undercoated the windows and have run into further problems. Some of the windows have started to weep liquid and are sticky from undercoating. I have experimented with trying to microwave one of the worst soft castings which seem to have cured it. The surface is still sticky from the undercoat though. I think the main issue is that the windows are too thin for the resin to generate much heat to cure fully. The instructions suggest heating the moulds in an oven which seems like a big effort for four small moulds which would mean having the oven running most of the day. I tried microwaving the moulds which did not seem to do much except burn the wood it was sitting on. Almost all of the boxes are fine unless the resin was not mixed enough which looks like swirl marks. I am going to try another make of undercoat with the discarded boxes to see how they react. At this stage I would not recommend anyone follow my example.











Saturday 19 November 2016

Unmarried Zulu Regiment UmHlanga

I had a few conundrums with this unit. The first one was that when I googled the name I found just about every image was of the Reed Ceremony. Not that I am complaining but its not really what I was looking for (lucky King). The next one was lack of any references as to the likely headdress worn. I thought that I had found some references awhile ago but cannot find now other than Black and White Ostrich Feathers. I had an indication that the shield was white with black spots. Now being an unmarried Regiment I went with black Shield with white spots instead.





Some of you may have heard that we had an Earthquake last week at 12.06 Sunday night.  I got out of bed and sheltered in a doorway and then thought my TV was about to fall off a cabinet if the shaking continued. So I stood leaning against the wall and holding the TV. I was only wearing a Tee shirt so didn't want broken glass on the floor. No damage at all locally but the City has had a few buildings fail but no loss of life. There are major issues down South that will require quite a bit of work to correct plus two deaths. Work has been busy when we are allowed to go into buildings to inspect equipment plus the normal work just carries on.




Wednesday 16 November 2016

Fish Tank Building

Normally I gaze longingly on other peoples purchases of Fish Tank Terrain as we do not seem to have such a wide selection of items here. The local shops do seem to bring in a few different items from time to time so I keep checking the shelves. So far I have bought a small Japanese type bridge I use in my Vietnam setting and a small ruined gatehouse and wall I started prepping for Frostgrave. I have not touched that for awhile and may paint it instead for Back of Beyond.

Last week I found a nice little Fish shop which is perfectly sized to go into my Vietnam collection. Not sure about the base and sign and not sure if its worth repainting at this stage.







Sunday 13 November 2016

Drop Cloth

Some weeks ago I bought myself a large piece of Camel coloured Polar Fleece. I was quite happy with the colour in the shop, but when I got it home and looked at it on my paint desk in bright sunlight it looked too garish to me. I next took it out to the games room which is darker and thought that it looked ok. So what would happen when I took it to a convention? was my next concern.

The next sunny weekend I was able to find time to try and dye the cloth to make it a Darker brown. Luckily I had a packet of Dye in my supplies so thought this was going to be easy.

Looks a bit garish

Looks better in Games room

Looking good

Normally this container holds my Pirate ships

It took overnight to dry out properly but when I compared the cloth to an off cut it looked no different to my eye.


So next step was to go and find some paint cans of the right colours.


Waiting a couple of weekends for some dry weather I then I hung the cloth onto the washing line and gave a light spray. (I wonder what the neighbours thought of me doing this and the smell?)







Looks ok to me, but when I reread Ian Knights accounts of the Battle of Isandlawana and Rorkes Drift he mentions that the Movie was filmed in the winter because the weather was more settled, but the battles actually happened when the spring growth of new grass should be quite evident. I think that when we have another dry weekend I will lay the cloth down on the back lawn and spray some Green paint horizontally and let the spray drift down to lightly coat the surface.