Saturday, 8 December 2018

Berlin Buildings - number 2 modified roof.

I needed to do a large modification to this building as the roof was looking too large. I cut off about 30mm from the bottom edge using a steel ruler and box cutter knife. It turned out easier than I previously thought as there was also a few sections of foam core bulkheads that needed cutting through as well. Everything seemed to come up nice and square and I hid the trimmed parts with some balsa.

Before modification




I now need to add some dormer windows and then do the tiling which I am probably running short of. I should order some now but with Xmas postage I may just leave it for the moment.

The method I use for making consistent sized rod for the windows started off being difficult so came up with a cheaper version of a plastic strip chopper. Using an aluminium box square and plastic card I managed to cut consistent strips. I only had problems when I allowed the knife blade to cut at an angle. A picture paints a thousand words so I hope this make things a bit clearer.



In the photo above the long thin rod is dropped into the slot in the photo below to give the correct length. I have coloured it red to stand out. The card marked block is used to stop the strips from moving around. The other piece of card is used as a backstop for the rod. There are wider channels in the aluminium box so I hope this works with other sized strip. I am using 1.5 plastic rod. I use the right hand edge of the box as a cutting guide.


Untrimmed rod in the device. 

The small strip is the lengthI am using for the windows.

Saturday, 1 December 2018

Goliath Gang - Necromunda

I bought the boxed set in January but had just put it aside until I felt I could devote some time to painting the figures properly. Little did I realise just how long these would take to paint. I spent the first week painting metallics as there is rather a lot of it. The second week was spent painting the three layers of red (which does not really show in the photos) and touching up the Metallics. I then spent two weeks painting everything else, and then did the bases last. There are three layers of flesh which again does not show in some of the photos. The Juves were converted from Catachans with 1mm added at the waist and knees. The guns come from a grot sprue that I had left over from years ago when I had an Ork Army. I don't ever want to paint another Goliath so won't be doing any ungraded models to show upgrades (if I ever play a game). I'm not really looking forward to painting the Eschers and have also a metal version of them to do.















 



Friday, 9 November 2018

Berlin Buildings - an update on progress.

Well this has turned out to be a much bigger task than I anticipated. Progress has been a bit slow as I am finding that I am taking two steps forward and another sideways, but progress is happening.

I built two buildings with windows from Resin, copied from some which I had built in plastic. I have attempted to assemble another two buildings but had issues with making more resin windows so put that aside till the warmer weather. I figured that the resin making kit stored in my back room is too cold most of the year and have just cleared a space in my cupboard where I keep my security monitor, as that seems to have a constant temperature most of the year.

The first building is ready to paint but, I am bothered with the way it looks. I suspect most people would say to not worry about it but the rest would say I messed up. Luckily its not too late to correct.
The issue I feel is that the roof looks like it has been designed by one committee and the building by another with different versions of the plans (what plans?)






The fix for this is actually quite easy as it turns out that by switching some small window sections with some larger ones the roof will fit exactly like it was meant to. The building is all glued together so I have had to cannibalise parts from buildings three and four to make a new version of building one.


Building two had the roof built to the same design as one but since I have not done any detail work on it yet I should be able to cut it down for a better fit.


Building four has now become a problem as I was originally going to make a copy of building two, but have taken out the larger window sections and replaced them with the smaller ones. I also have loads of bits left over so could make a large odd shaped building or the smaller one. For the moment I will be going for the small version and try and get another kit to use the spare parts on. I feel the large version will be hard to store and transport.




I case you are wondering what materials I have been using I will give a rundown.

Dark Grey Plastic - The Dust Tactics Tenement Buildings (2 versions)
Black parts - Foam Core.
White parts - either plastic card or cardboard.
Cream Windows - Resin.
Blue Roofing tiles - Charlie Foxtrot Roofing tiles (2 versions)
Down pipes - BBQ skewers.
Lamps - Mega Miniatures Medieval lamps.
Chimneys - Lego wrapped in Plastic card.
Roof edging - Balsa wood.
Black roof material - Sandpaper.

I would like to build some drop in rooms at some stage but want to concentrate on the buildings first for the moment.

Saturday, 27 October 2018

Charlie Foxtrot Garage

I finished this Garage a while ago but other things have gotten in the way of posting. I spent way too much time painting the roof in an attempt to match my 4Ground building, but alas it just kept getting darker. I should go out and buy some proper coloured roof paint rather than trying to mix it up myself. Its quite a nice little kit but I tried to add some extra detail in the way of a textured card to match my walls and some wooden detail around the roof section. I also made a gate for the walls using the damaged set of doors that come with the Garage. The floor was a happy accident when I put  some brown wash over the primer which looked horrible. I then resprayed it and then washed it with water and then put a wash over it. The can of paint is quite old so the texture turned out quite spotty.

I am working on other things at the moment and will probably get more of these buildings when I feel that I can fit them in to my painting queue.








Saturday, 20 October 2018

Battle for Berlin- Tank Hunters and Characters

My Tank Hunter Squad comprises of a Junior Leader and four Hunters armed with Panzerfausts. They are a mix of Warlord and Great Escape Games figures. I did not organise the photos very well but you should be able to pick these out from the photographs. 

The Characters are more Command types plus a Scientist. He is an Artisan figure armed with a Luger but I also gave hime an MP40. I did not want to give him a white coat so copied the colour of my old Dust Coat I had when I was a trainee Technician with the Post Office. The SS officer in the Leather Coat comes from TAG and was a freebie. The old wounded Officer is from the Warlord Last Levy set. The familiar looking fellow with the little moustache is a conversion using a Bolt Action figure with a WestWind head and some Greenstuff. He also got a Pistol. I call him "The Dishevelled Dictator" who is trying to make his escape.